木结构预制构件力学性能试验机，用于木结构梁柱、弯梁、墙体构件的强度性能测定。木结构预制构件在工厂进行胶合、开槽、打孔等预制加工，质量符合GB/T36872，GB/T26899-2011等标准要求，强度等级与锯材材质等级有关。木结构预制构件常用等级有sel级、P级，J级、sf级，1级-5级。
单板层积材力学强度试验机；结构用集成材物理性能试验机；承重集成材抗拉强度试验机；层积胶合集成材抗拉强度试验机；结构用集成材胶合性能试验机；单板层积材抗弯性能试验机；木材弯曲强度和弹性模量试验机；花旗松结构锯材力学试验机；樟子松结构集成材强度试验机；云杉结构用锯材集成材强度试验机；落叶松结构预制件强度试验机；长试样人造板木材弯曲强度试验机；人造板顺纹抗压强度弹性模量试验机；木材垂直承载力试验机；木材横纹承载力平行承载力试验机；结构木材顺纹横纹抗拉强度弹性模量试验机；结构木材接缝抗剪强度试验机；结构木材弯曲强度抗压强度试验机；木材垂直抗压抗拉承载力试验机；木材横向承载力扭转刚度试验机；木基结构板材力学性能试验机；45*90木材规格材顺纹抗剪强度试验机；受弯木结构集成材理化力学试验机；装配式轻型木结构指接规格材试验机；饰面用木质锯切薄板力学试验机；原木产品检验力学试验机；胶合板单板层积材旋切单板原木弯曲试验机；饰面刨切单板原木荷载硬度试验机；木材径向弦向破坏荷载力学试验机； AS/NZS 4266.0；AS/NZS 4266.1；AS/NZS 4266.2；AS/NZS 4266.3；AS/NZS 4266.5；AS/NZS 4266.6；AS/NZS 4266.7；AS/NZS 4266.8；AS/NZS 4266.9；AS/NZS 4266.10；AS/NZS 4266.11；AS/NZS 4266.13；AS/NZS 4266.14；AS/NZS 4266.20；AS/NZS 4266.24；AS/NZS 4266.27；AS/NZS 4266.28；AS/NZS 4266.32；AS/NZS 4266.33；AS/NZS 4266.34；AS/NZS 2269.0；AS/NZS 2098.4；AS/NZS 1604.1；AS/NZS 2098.11；AS/NZS 2098.2 B；AS/NZS 2098.3；AS/NZS 2269.1；GB/T50329-2012木结构试验方法标准；GB/T35217-2017；GB/T15787-2017原木检验；ISO 3346；ISO 3129；GB/T15779-2017；GB/T15106-2017；GB/T1943-2009；人造板防火板万能试验机；Dimension Lumber Characterization Tester；GB/T14017-2009；脚手架木模板弯曲强度试验机；GB/T1929-2009；AS/NZS 4063.1-2010；AS/NZS 4357.2；ISO 1033-1；ISO/DIS 12578；ISO/CD 12579；ISO/CD 12580；ISO/CD 18375；ANSI/AITC A 190.1；ASTM D 3737；DIN 1052；EN 386；EN 390；EN 408；BS EN 789；BS EN 326-1；GOST 9624；CNS 11671:2014；CNS 444:2012；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294-2011；ASTM D5055-2013；F B51-127-19；ASTM D5456-2010a；APA EWS S550-2005；BS EN 1912：2012；GB 50005-2017；GB 50009-2012；GB 50206-2012；GB/T17659.1-2018；GB/T17659.2-2018；GB/T29893-2013；GB/T29897-2013；GB/T50329-2012；GB/T50708-2012；GB/T50772-2012；GB/T51233-2016；GB/T51226-2017；LY/T2228-2013；LY/T2388-2014；JGJ/T265-2012；GB/T20240-2017竹集成材地板强度试验机；GB/T21140-2017非结构用指接材力学性能试验机；CNS 11029-2014；LY/T2711-2016单板用竹集成材力学强度试验机；JG/T464-2014集成材木门窗强度性能试验机；CNS 11032-2014；LY/T1927-2010集成材理化性能试验方法；LY/T1787-2016非结构用集成材弯拉强度试验机；ASTM D3528-2016双搭接剪切粘结接头强度试验机；CNS 11030-2014；CNS 11031-2014；CNS 11342-2014；CNS 11670-2014；CNS 11818-2014；Laminated Veneer Lumber Bending Strength Tester；Characterization of structural timber Tester；Stress-graded Timber tester；Tension strength；Thickness stability glue bond quality；Panel shear strength；Compression strength；Reconstituted wood-based panels-Methods of test；Sampling cutting and conditioning；Internal bond strength；Surface soundness；Swelling after immersion；Wet bending strength；Screw holding strength；Resistance to cracking；Stain resistance of melamine surface；Bond strength of PVC films PVC；Resistance to dry heat；Veneer bond strength；Veneer bond durability；the manufacture grading finishing and branding of structural plywood；Specifications for both stress and surface grades are also provided；dimensional tolerances joints moisture content and characteristic strength and stiffness values for the nominated F-grades；Scarf bending strength；Modulus of elasticity and rigidity；Wood-based Panels Large Span Flexural Strength Tester；MDF Large Span Flexural Strength Tester；Large Span Artificial Board Flexural Strength Tester；Wood-based Panels Long Test Specimen Tester；Wood Parallel Compression Strength Modulus of Elasticity；Wood grain Compression Strength Parallel to Grain；Bearing Strength Perpendicular to Grain；Method for determination of the modulus of elasticity in compression parallel to grain of wood；Standard for methods testing of timber structures；Cutting panel tester；Log of peeled veneer tester； |
