木结构用单板层积材力学强度试验机，结构用集成材物理性能试验，承重集成材抗拉强度试验；层积胶合集成材抗拉强度试验，结构用集成材胶合性能试验，单板层积材抗弯性能试验，弯曲强度和弹性模量试验。
大跨度长试样人造板木材弯曲强度试验机；人造板顺纹抗压强度弹性模量试验机；木材垂直承载力试验机；木材横纹承载力平行承载力试验机；结构木材顺纹横纹抗拉强度弹性模量试验机；结构木材接缝抗剪强度试验机；结构木材弯曲强度抗压强度试验机；木材垂直抗压抗拉承载力试验机；木材横向承载力扭转刚度试验机；木基结构板材力学性能试验机；木材规格材顺纹抗剪强度试验机；45*90规格材拉伸试验机；受弯木结构集成材理化力学试验机；装配式轻型木结构指接规格材试验机；饰面用木质锯切薄板力学试验机；原木产品检验力学试验机；胶合板单板层积材旋切单板原木弯曲试验机；饰面刨切单板原木荷载试验机；木材径向弦向破坏荷载力学试验机；木材物理力学硬度试验机；AS/NZS 4266.0；AS/NZS 4266.1；AS/NZS 4266.2；AS/NZS 4266.3；AS/NZS 4266.5；AS/NZS 4266.6；AS/NZS 4266.7；AS/NZS 4266.8；AS/NZS 4266.9；AS/NZS 4266.10；AS/NZS 4266.11；AS/NZS 4266.13；AS/NZS 4266.14；AS/NZS 4266.20；AS/NZS 4266.24；AS/NZS 4266.27；AS/NZS 4266.28；AS/NZS 4266.32；AS/NZS 4266.33；AS/NZS 4266.34；AS/NZS 2269.0；AS/NZS 2098.4；AS/NZS 1604.1；AS/NZS 2098.11；AS/NZS 2098.2 B；AS/NZS 2098.3；AS/NZS 2269.1；GB/T50329-2012木结构试验方法标准；GB/T35217-2017；GB/T15787-2017原木检验；ISO 3346；ISO 3129；GB/T15779-2017；GB/T15106-2017；GB/T1943-2009；人造板防火板万能试验机；Dimension Lumber Characterization Tester；GB/T14017-2009；脚手架木模板弯曲强度试验机；GB/T1929-2009；AS/NZS 4063.1-2010；AS/NZS 4357.2；ISO 1033-1；ISO/DIS 12578；ISO/CD 12579；ISO/CD 12580；ISO/CD 18375；ANSI/AITC A 190.1；ASTM D 3737；DIN 1052；EN 386；EN 390；EN 408；BS EN 789；BS EN 326-1；GOST 9624；CNS 11671:2014；CNS 444:2012；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294-2011；ASTM D5055-2013；F B51-127-19；ASTM D5456-2010a；APA EWS S550-2005；BS EN 1912：2012；GB 50005-2017；GB 50009-2012；GB 50206-2012；GB/T26899-2011；GB/T17659.1-2018；GB/T17659.2-2018；GB/T29893-2013；GB/T29897-2013；GB/T50329-2012；GB/T50708-2012；GB/T50772-2012；GB/T51233-2016；GB/T51226-2017；LY/T2228-2013；LY/T2388-2014；JGJ/T265-2012；100kN大跨度长木材强度试验机；1000kN木结构强度试验机；GB/T20240-2017竹集成材地板；GB/T21140-2017非结构用指接材；JG/T464-2014集成材木门窗；LY/T1927-2010集成材理化性能试验方法；LY/T2711-2016单板用竹集成材；LY/T1787-2016非结构用集成材； ASTM D3528-2016双搭接剪切粘结接头强度试验；CNS 11029-2014；CNS 11030-2014；CNS 11031-2014；CNS 11032-2014；HRJ Tests；CNS 11342-2014；CNS 11670-2014；CNS 11818-2014；
Laminated Veneer Lumber Bending Strength Tester；Characterization of structural timber Tester；Stress-graded Timber tester；Tension strength；Thickness stability glue bond quality；Panel shear strength；Compression strength；Reconstituted wood-based panels-Methods of test；Sampling cutting and conditioning；Internal bond strength；Surface soundness；Swelling after immersion；Wet bending strength；Screw holding strength；Resistance to cracking；Stain resistance of melamine surface；Bond strength of PVC films PVC；Resistance to dry heat；Heat resistance of PVC films PVC；Moisture resistance of finished foils；Veneer bond strength；Veneer bond durability；This Standard specifies requirements for the manufacture grading finishing and branding of structural plywood；Specifications for both stress and surface grades are also provided；The Standard also specifies veneer quality, bond quality standard lay-up construction, dimensional tolerances, joints, moisture content and characteristic strength and stiffness values for the nominated F-grades；Scarf bending strength；Modulus of elasticity and rigidity；Modulus of elasticity and rigidity；Wood-based Panels Large Span Flexural Strength Tester；MDF Large Span Flexural Strength Tester；Large Span Artificial Board Flexural Strength Tester；Wood-based Panels Long Test Specimen Tester；Wood Parallel Compression Strength Modulus of Elasticity；Wood grain Compression Strength Parallel to Grain；Bearing Strength Perpendicular to Grain；Method for determination of the modulus of elasticity in compression parallel to grain of wood；Standard for methods testing of timber structures；Cutting panel tester；Terms in log inspection；Log of peeled veneer tester； |
