AS/NZS 4266.0人造木基板材测试方法标准；AS/NZS 4266.1；AS/NZS 4266.2；AS/NZS 4266.3；AS/NZS 4266.5弯曲强度和弯曲模量；AS/NZS 4266.6内结合强度；AS/NZS 4266.7表面结合强度；AS/NZS 4266.8吸水厚度膨胀；AS/NZS 4266.9胶粘质量；AS/NZS 4266.10湿弯强度；AS/NZS 4266.11循环后内结合强度和弯曲强度；AS/NZS 4266.13握螺钉力；AS/NZS 4266.14尺寸稳定性；AS/NZS 4266.20耐磨性；AS/NZS 4266.24耐开裂性；AS/NZS 4266.27冲击性能；AS/NZS 4266.28粘合强度；AS/NZS 4266.32；AS/NZS 4266.33；AS/NZS 4266.34；AS/NZS 2269.0；
AS/NZS 2098.4；AS/NZS 1604.1；AS/NZS 2098.11；AS/NZS 2098.2 B；AS/NZS 2098.3弯曲强度；AS/NZS 2098.2；AS/NZS 2269.1 7.1；AS/NZS 2269.1 7.2；AS/NZS 2269.1 7.1 B；AS/NZS 2269.1 7.2弹性和刚性模量；AS/NZS 2269.1 7.3 Tension strength；AS/NZS 2269.1 7.4 Panel shear strength；AS/NZS 2269.1 7.5 Compression strength；Reconstituted wood-based panels-Methods of test；Sampling cutting and conditioning；Internal bond strength；Surface soundness；Swelling after immersion；Thickness stability glue bond quality；Wet bending strength；Screw holding strength；Resistance to cracking；Stain resistance of melamine surface；Bond strength of PVC films PVC；Resistance to dry heat；Heat resistance of PVC films PVC；Moisture resistance of finished foils；Veneer bond strength；Veneer bond durability；This Standard specifies requirements for the manufacture grading finishing and branding of structural plywood；Specifications for both stress and surface grades are also provided；The Standard also specifies veneer quality, bond quality standard lay-up construction, dimensional tolerances, joints, moisture content and characteristic strength and stiffness values for the nominated F-grades；Scarf bending strength；Modulus of elasticity and rigidity；Modulus of elasticity and rigidity；Wood-based Panels Large Span Flexural Strength Tester；MDF Large Span Flexural Strength Tester；Large Span Artificial Board Flexural Strength Tester；Wood-based Panels Long Test Specimen Tester；Wood Parallel Compression Strength Modulus of Elasticity；Wood grain Compression Strength Parallel to Grain；Bearing Strength Perpendicular to Grain；Method for determination of the modulus of elasticity in compression parallel to grain of wood；Standard for methods testing of timber structures；Cutting panel tester；Terms in log inspection；Log of peeled veneer tester；大跨度长试样人造板试验机，木材弯曲强度试验机；人造板总剥离率最大剥离率测定；人造板木破率特征强度测定；人造板内胶合结合强度测定；人造板表面胶合强度测定；人造板胶层剪切强度测定；人造板浸渍剥离性能测定；人造板沸煮剥离性能测定；结构用集成材减压加压剥离性能测定；聚氯乙烯膜饰面人造板耐剥离力测定；人造板握螺钉力测定；人造板顺纹抗压强度弹性模量试验机；木材垂直承载力试验机；木材横纹承载力平行承载力试验机；结构木材顺纹横纹抗拉强度试验机；结构木材拉伸弹性模量试验机；结构木材接缝抗剪强度试验机；结构木材弯曲强度抗压强度试验机；木材垂直抗压抗拉承载力试验机；木材横向承载力扭转刚度试验机；木基结构板材力学性能试验机；木材规格材顺纹抗剪强度试验机；45mm95mm规格材拉伸试验机；受弯木结构集成材理化力学试验机；装配式轻型木结构指接规格材试验机；饰面用木质锯切薄板力学试验机；原木产品检验力学试验机；胶合板单板层积材旋切单板原木弯曲试验机；饰面刨切单板原木荷载试验机；木材横纹抗拉极限应力试验机；hrjtest；木材径向弦向破坏荷载力学试验机；木材物理力学硬度试验机；GB/T50329-2012木结构试验方法标准；GB/T35217-2017；GB/T15787-2017原木检验；ISO 3346；ISO 3129；GB/T15779-2017；石膏板断裂荷载硬度试验机；GB/T15106-2017；GB/T1943-2009；人造板防火板万能试验机；瓷砖板材弯曲强度抗折试验机；Dimension Lumber Characterization Tester；GB/T14017-2009；脚手架木模板弯曲强度试验机；GB/T1929-2009；AS/NZS 4063.1-2010；AS/NZS 4357.2；ISO 1033-1；ISO/DIS 12578；ISO/CD 12579；ISO/CD 12580；ISO/CD 18375；ANSI/AITC A 190.1；ASTM D 3737；DIN 1052；EN 386；EN 390；EN 408；BS EN 789；BS EN 326-1；GOST 9624；CNS 11671:2014；CNS 444:2012；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294-2011；ASTM D5055-2013；ASTM D3528；NF B51-127-19；ASTM D5456-2010a；APA EWS S550-2005；BS EN 1912：2012；GB 50005-2017；GB 50009-2012；GB 50206-2012；GB/T26899-2011；GB/T17659.1-2018；GB/T17659.2-2018；GB/T29893-2013；GB/T29897-2013；GB/T50329-2012；GB/T50708-2012；GB/T50772-2012；GB/T51233-2016；GB/T51226-2017；hrjtest；LY/T2228-2013；LY/T2388-2014；JGJ/T265-2012；Characterization of structural timber Tester；Stress-graded Timber tester； |
