120kN大跨度人造板弯曲强度抗折试验机，测试长试样木材初期抗弯载荷、最终抗弯载荷、正弯曲力学性能、负弯曲力学性能。三点弯曲四点弯曲试验方法，测定长试样木材人造板的静曲强度和弹性模量。
→胶合板、不饱和聚脂树脂装饰胶合板刨花板，硬质纤维板、中密度纤维板MDF，结构用及非结构用单板层积材，表面装饰板、聚乙烯薄膜饰面人造板、装饰单板贴面人造板、浸渍胶膜纸饰面人造板，细木工板、实木复合地板、浸渍纸层压木质地板、竹地板、实木地板，挤压板、蜂窝状板、孔状板、空心结构板，木家具等物理力学性能测试研究。集成材组坯、结构用集成材、同等组合结构用集成材、异等组合结构用集成材、对称异等组合结构用集成材、非对称异等组合结构用集成材、大截面结构用集成材、中截面结构用集成材、小截面结构用集成材、等截面结构用集成材、变截面结构用集成材、水平结构用集成材、垂直结构用集成材、通直结构用集成材、弯曲型集成材、轴心受力用结构集成材、受弯结构用集成材等物理力学性能测试研究。水平型指结层板、垂直型指结层板、结构用胶合木、木嵌块等物理力学性能测试研究。机械应力分等层板纵接层板、机械应力分等非纵向接长层板(MSR层板) 物理力学性能测试研究。大跨度长试样人造板试验机，木材弯曲强度试验机；人造板总剥离率最大剥离率测定；人造板木破率特征强度测定；人造板内胶合结合强度测定；人造板表面胶合强度测定；人造板胶层剪切强度测定；人造板浸渍剥离性能测定；人造板沸煮剥离性能测定；结构用集成材减压加压剥离性能测定；聚氯乙烯膜饰面人造板耐剥离力测定；人造板握螺钉力测定；人造板顺纹抗压强度弹性模量试验机；木材垂直承载力试验机；木材横纹承载力平行承载力试验机；结构木材顺纹横纹抗拉强度试验机；结构木材拉伸弹性模量试验机；结构木材接缝抗剪强度试验机；结构木材弯曲强度抗压强度试验机；木材垂直抗压抗拉承载力试验机；木材横向承载力扭转刚度试验机；木基结构板材力学性能试验机；木材规格材顺纹抗剪强度试验机；45mm95mm规格材拉伸试验机；受弯木结构集成材理化力学试验机；装配式轻型木结构指接规格材试验机；饰面用木质锯切薄板力学试验机；原木产品检验力学试验机；胶合板单板层积材旋切单板原木弯曲试验机；饰面刨切单板原木荷载试验机；木材横纹抗拉极限应力试验机；hrjtest；木材径向弦向破坏荷载力学试验机；木材物理力学硬度试验机；GB/T50329-2012木结构试验方法标准；GB/T35217-2017；GB/T15787-2017原木检验；ISO 3346；ISO 3129；GB/T15779-2017；石膏板断裂荷载硬度试验机；GB/T15106-2017；GB/T1943-2009；人造板防火板万能试验机；瓷砖板材弯曲强度抗折试验机；hrjtest；GB/T14017-2009；脚手架木模板弯曲强度试验机；GB/T1929-2009；AS/NZS 4063.1-2010；AS/NZS 4357.2；ISO 1033-1；ISO/DIS 12578；ISO/CD 12579；ISO/CD 12580；ISO/CD 18375；ANSI/AITC A 190.1；ASTM D 3737；DIN 1052；EN 386；EN 390；EN 408；BS EN 789；BS EN 326-1；GOST 9624；CNS 11671:2014；CNS 444:2012；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294-2011；ASTM D5055-2013；ASTM D3528；NF B51-127-19；ASTM D5456-2010a；APA EWS S550-2005；BS EN 1912：2012；GB 50005-2017；GB 50009-2012；GB 50206-2012；GB/T26899-2011；GB/T17659.1-2018；GB/T17659.2-2018；GB/T29893-2013；GB/T29897-2013；GB/T50329-2012；GB/T50708-2012；GB/T50772-2012；GB/T51233-2016；GB/T51226-2017；LY/T1927-2010；LY/T2228-2013；LY/T2388-2014；JGJ/T265-2012；
Wood-based Panels Large Span Flexural Strength Tester；MDF Large Span Flexural Strength Tester；Large Span Artificial Board Flexural Strength Tester；Wood-based Panels Long Test Specimen Tester；Wood Parallel Compression Strength Modulus of Elasticity；Wood grain Compression Strength Parallel to Grain；Bearing Strength Perpendicular to Grain；Method for determination of the modulus of elasticity in compression parallel to grain of wood；Standard for methods testing of timber structures；Cutting panel tester；Terms in log inspection；Log of peeled veneer tester；Log of sliced veneer；Method for determination of the modulus of elasticity in compression perpendicular to grain of wood；Method of testing in tensile strength perpendicular to grain of wood；Method of sample logs sawing and test specimens selection for physical and mechanical tests of wood；Structural Timber Characterization Tensile Tester；hrjtest；Dimension Lumber Characterization Tester；Characterization of structural timber-Test methods；hrjtest；Stress-graded Timber tester；Bending Strength and Apparent Modulus of Elasticity；Tension Strength Parallel to Grain；Compression Strength Parallel to Grain；Beam Shear Strength；Bearing Strength Perpendicular to Grain；Bearing Strength Parallel to Grain；Modulus of Rigidity in Torsion；Tension Strength Perpendicular to Grain； |
