2000kN无振动伺服万能试验机，用于高强度金属复合材料拉伸试验、压缩试验、弯曲试验、剪切试验。测定高强材料拉伸强度、压缩强度、弯曲强度、剪切强度、拉脱剥离强度、焊接强度。恒瑞金公司研制发明的最新一代万能材料试验机，夹块开口大，材料拉伸试件平行放入夹块中快速拉伸，试件断裂无振动冲击。2000kN无振动伺服万能试验机不需地基基础和螺栓固定，直接放于地面使用。高强材料拉伸断裂瞬间试验机无振动、地面无振动，是传统万能材料试验机更新换代产品。
2000kN无振动伺服万能试验机；2000kN无振动钢筋钢管拉伸试验机；1000kN套筒接头反复拉压试验机；1000kN无振动伺服材料试验机；全自动钢筋称重测长仪；1000kN钢结构节点承载力试验机；三缸全自动钢筋弯曲试验机；hrjtest；2000kN钢丝绳索拉力试验机；500kN 2000kN电液伺服材料弯曲试验机；2000kN高低温材料力学性能试验机；500kN钢筋轴向力疲劳试验机；1000kN钢绞线轴向力疲劳试验机；5000kN动高强螺栓拉伸试验机；300kN～2000kN灌浆套筒钢筋机械连接试验机；1000kN钢筋机械连接拉伸试验机；1000kN无振动钢绞线拉伸试验机；hrjtest；50mm钢筋灌浆连接接头抗拉强度试验机；1000kN无振动伺服万能材料试验机；1000kN钢筋套筒灌浆连接件反复拉压试验机；ISO 6892-1；ISO 6892-2；ISO 20032；ISO 7348；ISO 23718；ISO 6935-1；ISO 6935-2；ISO 8491；ISO 8492；ISO 8493；ISO 8496；ISO 377:2017；ISO 1099；ISO 376；ISO 26203-2；ISO 15630-3；ASTM E8M-04；ASTM E9-89a；ASTM E111；ASTM E1875；BS EN 10002-1；JIS G0601；GB/T21839-2019；GB/T246-2017；GB/T2975-2018；hrjtest；GB/T30069.2-2016；GB/T228.1-2010；GB/T228.2-2015；GB/T7314-2017E；GB/T1499.1-2017；GB/T15248；GB/T1499.2-2018；GB/T13788-2017；GB/T13634；GB/T10623；GB/T3098.1-2015；GB/T3075；GB/T3091-2015；GB/T32468-2015；GB/T32976-2016； JB/T9397-2013；GB/T6525-2019；GB/T6396；JGJ/T27-2014；GB/T50344-2019；GB 50205-2020；GB/T37789-2019；JG/T288-2013；GB/T26957-2011；GB/T32260.1-2015；GB/T33943-2017；GB/T51232-2016；GB 51008-2016；NB/T31082-2016；TB 10091-2017；GB/T34505-2017；JG/T408-2019；GB/T24172；JG/T163-2013；YS/T542；YS/T485；YS/T550；GB/T2651；hrjtest；JGJ107-2016；JG/T398-2019；YB/T4503-2015；JGJ355-2015；T/CCIAT 004-2019；T/CECS 683-2020；jnshiyanji；T/CECS 687-2020；GB/T22315；GB/T25048；
No Vibration Servo Universal Tester；No Vibration Universal Materials Tester；No Vibration Materials Mechanics Tester；Materials Mechanics Strength Tester；Materials Axial Tensile Loading Strength Tester；Electro-hydraulic Servo Universal Tester；Grouting Sleeve Strength Mechanics Tester；High Temperature Tensile Tester；Steel bars Weight Length Tester；hrjtest；Rebar mechanical splicing Tensile Tester；Steel Strand Steel Bars Integration Tensile Tester；Metallic materials Tensile testing；Method of test at elevated temperature；Method for evaluation of tensile properties of metallic super plastic materials；Tension Testing of Metallic Materials；hrjtest；Metallic materials Compression testing at ambient temperature；Determination of compression strength for sintered metal materials；Metallic materials Bend test；Steel for the reinforcement of concrete；Hot rolled plain bars tester；Hot rolled ribbed bars tester；hrjtest；Cold rolled ribbed steel wires and bars；Standard for test methods of welded joint of reinforcing steel bars；Metallic materials Tube Bend tester；Metal materials Tube Flattening tester；hrjtest；Metallic materials Tube Ring tensile tester；Determination of modulus of elasticity and poissons ratio；Tubes Transverse bending tester；Tube Drift expending tester；Location and preparation of samples and test pieces for mechanical testing；Welded steel pipes for low pressure liquid delivery；Metallic materials Tensile testing at high strain rates；hrjtest；Calibration of force-proving instruments used for the verification of uniaxlial testing machines；Servo-hydraulic and other test systems；Metallic materials Fatigue testing Axial force controlled method；Axial loading constant-amplitude low-cycle fatigue of metallic materials；hrjtest；Clad steel plates-Mechanical and technological tester；Copper clad aluminum plate sheets and strips；Thermal sprayed coatings Determination of tensile strength；Sintered bimetal material shear strength；Thermal sprayed metallic coatings shear strength；Mechanical properties of fasteners-Bolts screws and studs；hrjtest；Couplers for rebar mechanical splicing；hrjtest；The grouting sleeve for rebars splicing；Construction Technical Specification for Grout Sleeve Splicing of Rebars；Concrete Axial Tension Load Tester；Repeated Tension Compression Tester for Grout Sleeve Splicing of Rebars；
济南恒瑞金试验机有限公司；无振动伺服材料力学试验机；山东省力值硬度计量委员
（试验机服务中心）（试验机配件供应中心）（特殊夹具定制中心） |
