JC/T2538-2019玻璃纤维增强塑料连续缠绕夹砂管,适用于公称直径为200mm~4000mm,压力等级为0.1MPa~3.2MPa,环刚度等级为1250 N/m2~10000N/m2给
排水、水利、农田灌溉等管道工程用玻璃纤维增强塑料连续缠绕夹砂管,介质最高温度不超过50 ℃。jnshiyanji;非夹砂的玻璃纤维增强塑料连续缠绕管可参照使用。JC/T2538-2019规定了玻璃纤维增强塑料连续缠绕夹砂管的术语和定义、分类和标记、原材料、要求、试验方法、检验规则、标志、包装、运输及起吊、贮存。
100kN缠绕夹砂管环刚度试验机,用于公称直径200~4000mm夹砂管初始环刚度试验、初始环向拉伸强力试验、初始轴向拉伸强力及拉伸断裂应变试验、初始挠曲性试验、初始环向弯曲强度试验、长期环向拉伸强度试验、长期弯曲应变试验;200kN缠绕夹砂管环向拉伸强力试验机;65mm夹砂管拉伸强力试验夹具;缠绕夹砂管初始力学性能试验;缠绕夹砂管水压渗漏试验;jnshiyanji;管材焊缝拉伸强度试验机;电热熔带焊缝拉伸强度试验机;PE管材环刚度试验机;UPVC管材环刚度试验机;CPVC管材环刚度试验机;PE-X管材环刚度试验机;PP-R管材环刚度试验机;PB管材环刚度试验机;PS管材环刚度试验机;PAP管材环刚度试验机;SP管材环刚度试验机;hrjtest;PPR热水管材环刚度试验机ABS管材环刚度试验机;RPM管材环刚度试验机;双壁波纹管环刚度试验机;通讯管道环刚度试验机;5kN波纹管纵向载荷试验机;20kN波纹管土工膜综合力学试验机;50kN土工材料综合力学性能试验机;缠绕夹砂管同心变径管性能试验;CWFP缠绕夹砂管初始环向拉伸强力附具;FRPM夹砂管材初始环向拉伸强力试验;jnshiyanji;2000Nm管材扭矩试验机;1000Nm碳纤维管扭转试验机;500Nm管件扭转试验机;300kN管接件拉伸试验机;50kN抗外压载荷试验机;300kN管材垂直承载力压力试验机;2000kN管材压扁试验机;1000kN管材扩口试验机;1000kN管材弯曲试验机;5000N密封件摩擦磨损试验机;100N.m浮封跑合摩擦磨损试验机;2000kN无振动伺服万能材料试验机;1000kN无振动灌浆套筒高应力反复拉压试验机;1000kN灌浆套筒大变形反复拉压试验机;
ISO 7342;ISO 8483;ISO 8533;ISO 8639;ISO 10928;EN 13476;ISO 9969;EN 13598;SY/T4108-2019;YD/T841.4-2016;GB/T21238-2016;ISO 10639;GB/T1447;GB/T1449;GB/T1458;GB/T1634.2;GB/T2567;GB/T2573;GB/T2576;GB/T2577;GB/T3854;GB 4806.6-2016;GB/T5349;GB/T5351;GB/T5352;GB/T8237;GB/T18369;GB/T21873;GB/T32491;GB/T9647-2015;GB/T35451.1-2017;GB/T35185-2017;GB/T19570-2017;GB/T13663.1-2017;GB/T34275-2017;jnshiyanji;GB/T19472.2-2017;GB/T34645-2017;GB/T18742.1-2017;GB/T18742.2-2017;GB/T18742.3-2017;GB/T34506-2017;GB/T34567-2017;GB/T34611-2017;GB/T34105-2017;GB/T34107-2017;GB/T34109-2017; GB/T246-2017;GB/T18477.2-2011;GB/T18042;GB/T14452;GB/T18477.1;GB/T18477.3;CJ/T270;JT/T529;GB/T18742.1;GB/T2918;GB/T8806;GB/T19472.1;HG/T3731;HG/T4373
Fiberglass Mortar Pipes Ring Stiffness Tester;Continuous advancing mandrel winding fiberglass mortar pipes;Corrugated Pipe Ring Stiffness Geosynthetics Load Tester;Corrugated Pipe Ring Stiffness Load Tester;Geosynthetics Mechanics Properties Tester;Corrugated Pipe Axial Load Tester;Thermoplastics pipes-Determination of ring stiffness;Determination of creep ratio;PE-UHMW Pipes Tester;Ring Stiffness Testing Machine;Pipe Fittings Torsion Fatigue Tester;Underground soil waste and drainage;Polypropylene(PP) piping systems for hot and cold water installations;Glass fiber reinforced plastics mortar pipes;hrjtest;Fibre-reinforced plastic pipes;Plastics piping systems Plastics components;Underground drainage and sewerage;Polypropylene double wall corrugated pipes;Wall pipes for soil and waste discharge inside buildings;afety assessment for electro fusion joint of polyethylene pipes containing defects;hrjtest;Stainless steel plastic laminated pipe and fitting;High density polyethylene pipes and fittings for drainage inside buildings;Steel reinforced spirally wound Polyethylene(PE) drainage pipe;Steel wire reinforced ultra high molecular weight polyethylene composite pipe;Pipes and joints made of oriented unplasticized poly;conveyance of water under pressure;Steel-plastic complex pipes of short pitch internal spiral rib for drainage inside buildings;High performance unplasticized poly pipes and fittings for water supply;Plastic bellows for prestressed concrete bridge;hrjtest;Corrugated metal ducts for prestressed concrete;Ultra high molecular weight polyethylene;Plastic pipes in coal mining;Floating Ring Seal Abrasion Tester;Floating Ring Seal Friction Wear Tester;No Vibration Universal Materials Tester;
济南恒瑞金试验机有限公司;玻璃纤维塑料夹砂管力学性能试验机;山东省力值硬度计量委员
(试验机服务中心)(试验机配件供应中心)(特殊夹具定制中心) |