50kN型材短期焊接系数试验机,依据GB/T8814-2017,测定门窗用未增塑聚氯乙烯(PVC-U)型材焊接系数。HRJ Tester;型材两截面对焊成1个焊接段,至少应取5个焊接段,然后在每个焊接段上分别从装饰面和非装饰面上个截取1个焊片,按照GB/T1040.2中1B型试样制样,焊缝位于试样中部,不清理焊缝。另外,从型材的装饰面和非装饰面上再至少各取5个相同尺寸未经焊接的试样。
按照GB/T1040.2规定进行拉伸试验,非装饰面的试验速率为(50±1)mm/min,装饰面的试验速率为(5±1)mm/min,求取焊接试样拉伸断裂时的平均负荷、未焊接试样拉伸断裂时的平均负荷,计算短期焊接系数。如果试样在断裂前出现屈服,应以屈服负荷进行计算。
50kN型材拉伸屈服应力试验机;HRJ Tester;基材拉伸断裂应变次测试;型材基材弯曲弹性模量测定;FM型材覆膜层与基材的剥离强度测试;1500mm通体型材落锤冲击试验机;1000mm落球冲击试验机;装饰型材落锤冲击试验;非对称多腔结构型材落锤冲击试验;Ⅰ级落锤冲击试验机;Ⅱ级Ⅲ级落锤冲击试验机;浮辊法测定高强度胶接接头的剥离强度;HRJ Tester;30kN型材弯曲强度测定;型材弯曲应力-应变关系曲线;型材中央加荷试验装置;型材三点加荷试验方法;50kN型材短期焊接系数试验机;100kN焊接试样拉伸断裂负荷试验;塑料简支梁冲击性能的测定;双缺口冲击强度保留率;HRJ Tester;50J非仪器化冲击试验;150N.m防火门闭门器试验机;jnshiyanji.net;100kN铝合金型材拉伸试验机;20kN型材焊角强度试验机;GB/T8814-2017门窗用未增塑聚氯乙烯(PVC-U)型材;EN 12608;ISO 527-2;ISO 4578;ISO 178;ISO 179;ISO 180;ISO 291;ISO 293;ISO 294-1;ISO 295;ISO 2602;ISO 3167;ISO 5893;ISO 1268;jnshiyanji.net;GB/T1040.2;GB/T7122;GB/T9341;GB/T1043.1;
Doors Windows Mechanics Properties Tester;Angle Strength Testing Machine;PVC-U Main Profile Strength Tester;HRJ Tester;PVC-U Auxiliary Profile Tester;PVC-U Tensile Tester;Falling Ball Impact Tester;Steel Ball Impact Tester;Unplasticized polyvinyl chloride (PVC-U) profiles for the doors and windows;Classification requirements and test methods;Plastics-Determination of tensile properties;HRJ Tester;Test conditions for moulding and extrusion plastics;Adhesives-Determination of peel resistance of high-strength adhesive bonds-Floating roller method;Plastics-Determination of flexural properties;Plastics-Determination of charpy impact properties;Non-instrumented impact test;Fire resistant Doorsets Tester;Fire-proof Door Closer Tester;jnshiyanji.net;Various Testing Machines;Laboratory Equipment;China Material Tester;World Material Tester;Tester Service Center;Tester Fittings Supply Center;Test Accessories Design Manufacture Center;Special Test Accessories Center;Material Tester Attachment Fixture;
济南恒瑞金试验机有限公司;铝合金型材试验机制造商;山东省力值硬度计量委员
(试验机服务中心)(试验机配件供应中心)(特殊夹具定制中心) |