GB/T528-2009 硫化橡胶或热塑性橡胶拉伸应力应变性能的测定；GB/T529-2008 硫化橡胶或热塑性橡胶撕裂强度的测定（裤形、直角形和新月形试样）；HRJ Tester；GB/T7762-2014硫化橡胶或热塑性橡胶耐臭氧龟裂静态拉伸试验；GB/T18425-2014蒸汽橡胶软管和软管组合件试验方法；GB/T13936-2014硫化橡胶与金属粘接拉伸剪切强度测定方法；GB/T15254-2014硫化橡胶与金属粘接 180°剥离试验；GB/T16586-2014硫化橡胶与钢丝帘线粘合强度的测定；GB/T3513-2018硫化橡胶与单根钢丝粘合力的测定抽出法；GB/T7757-2009硫化橡胶或热塑性橡胶压缩应力应变性能的测定；GB/T7759.1-2015压缩永久变形的测定在常温及高温条件下；GB/T7759.2-2014压缩永久变形的测定在低温条件下；HRJ Tester；GB/T7760-2003硫化橡胶或热塑性橡胶与硬质板材粘合强度的测定 90°剥离法；GB/T7761-2003橡胶用锥形件测定与刚性材料的粘合强度；GB/T9870.1-2006硫化橡胶或热塑性橡胶动态性能的测定；GB/T9870.2-2008硫化橡胶或热塑性橡胶动态性能的测定低频扭摆法；GB/T9871-2008硫化橡胶或热塑性橡胶老化性能拉伸应力松弛试验；GB/T1687.1-2016硫化橡胶在屈挠试验中温升和耐疲劳性能的测定；GB/T1687.3-2016硫化橡胶在屈挠试验中温升和耐疲劳性能的测定 第3部分：压缩屈挠试验（恒应变型）；GB/T19242-2003硫化橡胶在压缩或剪切状态下蠕变的测定；GB/T1683-2018硫化橡胶恒定形变压缩永久变形的测定方法；GB/T1685-2008硫化橡胶或热塑性橡胶在常温和高温下压缩应力松弛的测定；GB/T13642-2015硫化橡胶或热塑性橡胶耐臭氧龟裂动态拉伸试验；HRJ Tester；GB/T6036-2001硫化橡胶或热塑性橡胶低温刚性的测定（吉门试验）；GB/T7758-2002硫化橡胶低温性能的测定温度回缩法（TR试验）；GB/T532-2008硫化橡胶或热塑性橡胶与织物粘合强度的测定；GB/T23654-2009建筑用预成型密封条的分类、要求和试验方法；GB/T2942-2009硫化橡胶与纤维帘线静态粘合强度的测定H抽出法；GB/T1682-2014硫化橡胶低温脆性的测定单试样法；GB/T1688-2008硫化橡胶伸张疲劳的测定；jnshiyanji.net；GB/T14834-2009硫化橡胶或热塑性橡胶与金属粘附性及对金属腐蚀作用的测定；GB/T15256-2014硫化橡胶或热塑性橡胶低温脆性的测定(多试样法)；GB/T1681-2009硫化橡胶回弹性的测定；GB/T1232.4-2017门尼应力松弛率的测定；GB/T12829-2006德尔夫特试样撕裂强度的测定；GB/T12830-2008与刚性板剪切模量和粘合强度的测定四板剪切法；GB/T11211-2009与金属粘合强度的测定二板法；HG/T3868-2008硫化橡胶高温拉伸强度和拉断伸长率的测定；GB/T2941-2006橡胶物理试验方法试样制备和调节通用程序；HG/T3101-2011硫化橡胶伸张时的有效弹性和滞后损失试验方法；HG/T3102-2011硫化橡胶多次压缩试验方法；HG/T3243-2005硫化橡胶拉伸应力松弛仪技术条件；HG/T3321-2012硫化橡胶弹性模量的测定方法；HRJ Tester；HG/T3322-2012硫化橡胶定伸永久变形模量测定器法；HG/T3843-2008硫化橡胶短时间静压缩试验方法；HG/T3866-2008硫化橡胶压缩耐寒系数的测定；HG/T3867-2008硫化橡胶拉伸耐寒系数的测定；HG/T2198-2011硫化橡胶物理试验方法的一般要求；HG/T2729-2012硫化橡胶与薄片摩擦系数的测定滑动法；
Rubber Vulcanized or Thermoplastic Tester；HRJ Tester；Resistance to ozone cracking-Static strain testing；Method for determination of strength properties of adhesive to metal in shear by tension loading；Determination of adhesion to metal-180°peel test method；Determination of adhesion to single wire-Pull out test；Determination of aging characteristics by measurement of stress relaxation；Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomersmdash Tension；Determination of temperature rise and resistance to fatigue in flexometer testing；jnshiyanji.net；Compression flexometer constant-strain type；Determination of creep in compression or shear；Determination of compression stress-strain properties；Determination of compression set at constant strain；Determination of stress relaxation in compression at ambient and at elevated temperatures；Resistance to ozone cracking-Dynamic strain testing；Determination of tensile strength and elongation at break in high temperature； |
