100kN～1000kN数显万能材料试验机用于金属材料、非金属材料、复合材料在室温环境下进行拉伸试验、压缩试验、弯曲试验、抗扭转试验、剪切试验等，力学性能实验测试及研究。
WES-D100kN万能材料试验机；WES-D300kN数显材料试验机；WES-D600kN数显万能试验机；WES-D1000kN数显万能试验机；WES-B100kN数显材料试验机；WES-B300kN万能材料试验机；WES-B600kN万能材料试验机；WES-B1000kN万能材料试验机；1000kN钢筋拉伸试验机；100kN板材拉伸试验机；300kN棒材拉伸试验机；1000kN线缆绳索拉伸试验机；1000kN紧固件拉伸试验机；300kN金属管压扁试验机；600kN脚手架钢管拉伸试验机；1000kN铸铁试件拉伸试验；300kN剖条试样拉伸试验；1000kN焊接强度试验机；1000kN钢筋机械连接拉伸试验机；600kN钢绞线钢材双位拉伸试验机；1000kN螺栓拉伸试验机；1000kN伺服万能试验机；钢筋全自动称重测长仪；40mm全自动钢筋弯曲试验机；
GB/T6525-2019烧结金属材料室温压缩强度的测定；GB/T34505-2017铜及铜合金材料室温拉伸试验方法；复合钢板力学及工艺性能试验方法；HRJ Tester；GB/T24172金属超塑性材料拉伸性能测定方法；YS/T542热喷涂层抗拉强度的测定；YS/T485烧结双金属材料剪切强度的测定方法；YS/T550金属热喷涂层剪切强度的测定；77.040.10金属材料力学试验；ISO 6892-1；ISO 6892-2；ISO 20032；ISO 7348；ISO 23718；ISO 6935-1；ISO 6935-2；ISO 8491；ISO 8492；ISO 8493；ISO 8496；ISO 377:2017；ISO 1099；ISO 376；ISO 26203-2；ASTM E8M-04；ASTM E9-89a；ASTM E 111；ASTM E 1875；BS EN10002-1；JIS G 0601；GB/T246-2017；GB/T2975-2018；GB/T30069.2-2016；HRJ Tester；GB/T228.1-2010；GB/T228.2-2015；GB/T7314-2017E；GB/T1499.1-2017；GB/T1499.2-2018；GB/T13788-2017；GB/T232；GB/T242；GB/T244；GB/T10623；GB/T3098.1-2015；GB/T13634； GB/T3075；GB/T15248；GB/T3091-2015；GB/T32468-2015；GB/T32976-2016；JB/T9397-2013；GB/T6396；GB/T25048；GB/T22315；JGJ/T27-2014；
Digital Hydraulic Universal Tester；Electro-hydraulic Universal Testing Machine；Steel bars Weight Length Tester；Rebar mechanical splicing Tensile Tester；Steel Strand Steel Bars Integration Tensile Tester；HRJ Tester；Metallic materials Tensile testing；Method of test at elevated temperature；Method for evaluation of tensile properties of metallic super plastic materials；Standard Test Methods for Tension Testing of Metallic Materials；Metallic materials Bend test；Metallic materials Mechanical testing；Steel for the reinforcement of concrete；Hot rolled plain bars test；Hot rolled ribbed bars test；Cold rolled ribbed steel wires and bars test；Standard for test methods of welded joint of reinforcing steel bars；Metal materials Tube Flattening test；Metallic materials Tube Ring tensile test；Determination of modulus of elasticity and poissons ratio；Tubes Transverse bending test；Tube Drift expending test；Location and preparation of samples and test pieces for mechanical testing；Welded steel pipes for low pressure liquid delivery；Calibration of force-proving instruments used for the verification of uniaxlial testing machines；HRJ Tester；Servo-hydraulic and other test systems；Metallic materials Fatigue testing Axial force controlled method；Axial loading constant amplitude low cycle fatigue；Clad steel plates Mechanical and technological test；Copper clad aluminum plate, sheets and strips；Thermal sprayed coatings Determination of tensile strength；Sintered bimetal material shear strength；Thermal sprayed metallic coatings shear strength；Mechanical properties of fasteners-Bolts screws and studs；China Material Tester；
济南恒瑞金试验机有限公司；材料试验机制造商；试验机服务中心；试验附具夹具配件中心 |
