纤维增强塑料试验标准：ASTM D2290；ASTM D2291；ASTM D2344/D2344M；ASTM D2412；ASTM D695；ISO 14125；ISO 14126；ISO 12114；ISO 527-4；ISO 604；ISO 15733:2015；ISO 20504；ISO 17138:2014；ISO 10618；
GB/T36262-2018结构工程用纤维增强复合材料网格；HRJ Tester；GB/T36264-2018超高温氧化环境下纤维复合材料拉伸强度试验方法；GB/T36532-2018热固性模塑料和预浸料固化特性测定；GB/T35465.2-2017聚合物基复合材料疲劳性能测试方法；GB/T35465.3-2017聚合物基复合材料拉-拉疲劳性能测试；GB/T35156-2017结构用纤维增强复合材料拉索；GB/T3362-2017碳纤维复丝拉伸性能试验方法；GB/T3354-2014定向纤维增强聚合物基复合材料拉伸性能试验方法HRJ Tester；；GB/T3355-2014聚合物基复合材料纵横剪切试验方法；GB/T3356-2014定向纤维增强聚合物基复合材料弯曲性能试验方法；GB/T30021-2013经编碳纤维增强材料；GB/T30022-2013纤维增强复合材料筋基本力学性能试验方法；GB/T28461-2012碳纤维预浸料；GB/T29324-2012架空导线用纤维增强树脂基复合材料芯棒；GB/T26743-2011结构工程用纤维增强复合材料筋；GB/T26744-2011结构加固修复用玻璃纤维片材；GB/T26745-2011结构加固修复用玄武岩纤维复合材料；HRJ Tester；GB/T26749-2011碳纤维浸胶纱拉伸性能的测定；GB/T26752-2011聚丙烯腈基碳纤维；GB/T1458纤维缠绕增强塑料环形试样力学性能试验方法；GB/T1446纤维增强塑料性能试验方法总则；GB/T4944玻璃纤维增强塑料层合板层间拉伸强度试验方法；GB/T5258纤维增强塑料面内压缩性能试验方法；GB/T5349纤维增强热固性塑料管轴向拉伸性能试验方法；GB/T5350纤维增强热固性塑料管轴向压缩性能试验方法；GB/T5352纤维增强热固性塑料管平行板外载性能试验方法；HRJ Tester；GB/T7559纤维增强塑料层合板螺栓连接挤压强度试验方法；GB/T9979纤维增强塑料高低温力学性能试验准则；GB/T21490结构加固修复用碳纤维片材；YB/T151-2017混凝土用钢纤维；JC/T2404-2017室温下连续纤维增强陶瓷基复合材料拉伸性能试验方法；JC/T2405-2017室温下连续纤维增强陶瓷基复合材料弯曲强度试验方法；JC/T2406-2017室温下连续纤维增强陶瓷基复合材料压缩性能试验方法；JG/T167-2016结构加固修复用碳纤维片材；JG/T406-2013土木工程用玻璃纤维增强筋；HRJ Tester；JG/T351-2012纤维增强复合材料筋；JT/T532桥梁结构用碳纤维片材；GB/T28889-2012面内剪切强度附具；ASTM D7078面内剪切模量附具；ISO 14126平面压缩测试附具；JC/T773-2010短梁法层间剪切强度附具；劈裂圆盘法测定塑料管环形试样表观拉伸强度；常温静载螺栓连接挤压强度测试；对称均衡层合板面内拉伸性能测定；层合板纵横剪切性能测定；±45°方向拉伸载荷连续纤维层合板；HRJ Tester；塑料管轴向拉伸强度测试；8mm～32mm纤维材料筋剪切强度测试；
Mechanical properties of ring of filament-winding reinforced plastics；Bearing strength by bolted joints of fiber reinforced plastics laminates；Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures；Tensile properties of orientation fiber reinforced polymer matrix composite materials；Fiber reinforced polymer composites structural cables；Fiber-reinforced plastics composites；In-plane shear response of polymer matrix composite materials；Flexural properties of orientation fiber reinforced polymer matrix composite materials；Tensile properties of carbon fiber multifilament；Tensile strength of glass fiber reinforced plastic laminates；Determination of compressive properties in the in-plane direction；Determination of longitudinal tensile properties；Fiber reinforced polymer matrix composite core for overhead electrical conductors；Determination for longitudinal compressive properties；Determination for external loading properties by parallel-plate loading；Determination of cure characteristics；Test for isotropic and orthotropic fiber；Fiber-reinforced plastics tensile test；composites flexural test；Interlaminar shear strength test；Punch-type shear strength test；flatwise tension strength of sandwich constructions；flatwise compression properties Test；sandwich constructions compression Test；edgewise compressive properties of sandwich constructions；Shear properties of sandwich constructions or cores；cores shear properties Test；Flexural properties of sandwich constructions；Fiber reinforced composite bars for civil engineering；Glass fiber sheet for strengthening and restoring structures；Basalt fiber composites for strengthening and restoring structures；Basic mechanical properties of fiber reinforced polymer bar；Carbon fiber sheet for strengthening and restoring structures；PAN-based carbon fiber；Carbon fiber prepreg；Determination of tensile properties of resin-impregnated yarn；Carbon fiber laminate for strengthening and restoring structures；Warp knitting carbon fiber reinforcements；Carbon fiber reinforced polymer laminate for bridge structures；Steel fibers for fiber reinforced concrete；Tester Service Center；Tester Fittings Supply Center；Design and Manufacture Center；Special Test Accessories；
济南恒瑞金试验机有限公司；力学检测仪器制造商；山东省力值硬度计量委员
（试验机服务中心）（试验机配件供应中心）（特殊夹具定制中心） |
