GB/T26899-2011结构用集成材抗拉试验，试件长度要大于2400mm，保证在抗拉试验时，夹具间距离大于2400mm，试件两端夹持部分长度应大于300mm，平均加载速度不大于10MPa。
300kN结构集成材抗拉试验机；含水率12％时顺纹抗拉强度试验；300kN阔叶材抗拉强度试验；300kN针叶材抗拉强度试验；HRJ Tests；结构用集成材物理性能试验；结构用集成材质量控制方法；承重集成材抗拉强度试验；层积胶合集成材抗拉强度试验；指接集成材抗拉强度试验；斜接集成材抗拉强度试验；拼宽集成材抗拉强度试验；4.5物理力学和化学性能17；5.1结构用集成材胶合性能试验方法19；5.3抗弯性能试验22；5.4抗拉强度试验25；5.6结构用集成材主要物理化学性能检测的抽样方法28；5.7试验结果判定29；附录A结构用集成材生产及质量控制30；附录B部分国家和地区结构用集成材强度等级对应关系45；300kN集成材试验机测试抗拉强度、抗压强度和弹性模量、弯曲强度和弹性模量；100kN～300kN规格材拉伸试验机；600kN结构木材试验机；HRJ-Test英文版集成材测试软件（ISO、JIS、ASTM、DIN、BS、NF、EN、AS、NZS、NBR、IEC、GOST、CNS、APA)；100kN大跨度木材强度试验机；120kN长木材强度试验机；1000kN木结构强度试验机；GB/T20240-2017竹集成材地板；GB/T21140-2017非结构用指接材；JG/T464-2014集成材木门窗；LY/T1927-2010集成材理化性能试验方法；LY/T2711-2016单板用竹集成材；LY/T1787-2016非结构用集成材；APA EWS S550-2005集成材工字梁；HRJ Tests；ASTM D5055-2005木制工字梁结构能力确定；ASTM D3528-2016双搭接剪切粘结接头强度试验方法；CNS 11029-2014；CNS 11030-2014；CNS 11031-2014；CNS 11032-2014；HRJ Tests；CNS 11342-2014；CNS 11670-2014；CNS 11671-2014；CNS 11818-2014；
Structural glued laminated timber tensile test；Structural Timber Characterization Tester
Structural glued laminated timber tensile strength tester；HRJ Tests；Glulam for decorative use tester；Overlaid glulam for decorative use tester；Composite wood flooring tester；Scaffolding plywood tester；Structural plywood tester；Laminated veneer lumber tester；Glued laminated bamboo flooring tester；Finger-jointed lumber tester；HRJ Tests；Glued laminated timber doors and windows tester；Test method of evaluating the properties of glued-laminated timber；Bamboo laminated lumber for veneer tester；HRJ Tests；This specification gives procedures for establishing，monitoring and reevaluating structural capacities of prefabricated wood I-joists. Capacities considered are shear, moment, and stiffness. Procedures for establishing common details are given and certain design considerations specific to wood I-joists are itemized；HRJ Tests；Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading；Material Testing Machine；Various Testing Machines；Laboratory Equipment；China Material Tester；Asia Material Tester；World Material Tester；International Type Material Tester；Testing Machines Manufacturer；Mechanics Tester Manufacturer；Tester Service Center；Tester Fittings Supply Center；Special Test Accessories Center；Test Accessories Design Manufacture Center；Testing Machine Accessories；Material Tester Attachment；Material Tester Fixture；Jinan HengRuiJin Testing Machine Co.,Ltd.
济南恒瑞金试验机有限公司；材料试验机制造商；山东省力值硬度计量委员
（试验机服务中心）（试验机配件供应中心）（特殊夹具定制中心） |
